|
|
|
Instructions for Quick Blade Changing Tool
|
HOME · BREAD SLICERS · BAGEL, BUN SLICERS · DOUGH MAKEUP · BAGGERS, TYING MACHINES
BAKERY OVENS · SLICER BLADES, TOOLS · ALL EQUIPMENT · PRODUCT MANUALS · SALES · CONTACT |
 |
NEW!! - Blade changing instructional videos for the Oliver Model 711 Countertop Bread Slicer
For ease of download and streaming, the video is separated into three parts as shown below. You should already have the QuickTime plugin necessary to view the videos; if you don't, you can get it HERE.
Click on the images below to pop open the videos.
|
| |
Removing the Blade Frame
 |
Replacing the Blades
 |
Replacing the Blade Frame
 |
| |
Oliver Quick Blade Changing Tool
Part No. 0797-0183-006
|
|
|
Old Blade Removal
- Place the tool's large opening onto the blade tensioning pin.
- Relieve the tension of the blade by pushing on the other end of tool.
- Snap all of the blades off this way.
|
|
New Blade Installation
- Place blade onto blade tensioning pin only, making sure the sharp side of the blade is facing the same as the old blades.
|
|
- Insert tool over the blade and blade tensioning pin.
The tool will hold the blade on the blade tensioning
pin.
|
|
- Apply force forward on the tool, against the blade tensioning pin,
until the other end of the blade lines up
- Place other end of blade onto the stationary blade pin, making
sure that it is flat against the pin.
|
|
New Blade Installation Check
- After installation is complete, gently tap each blade on the
non-sharpened side to insure that each blade is installed properly.
|
|
Please contact Oliver for questions at (800) 253-3893 or
email customer service
|
HOME · BREAD SLICERS · BAGEL, BUN SLICERS · DOUGH MAKEUP · BAGGERS, TYING MACHINES
BAKERY OVENS · SLICER BLADES, TOOLS · ALL EQUIPMENT · PRODUCT MANUALS · SALES · CONTACT |
|
|